Model RM-3 is a rack stereo powered monitor speaker system to succeed the current model RM-2.

New features include a THRU OUT, brightness adjustment of LED, and auto memory of Input / Output status etc. via newly added DIP switch on the rear panel.

The RM-3 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, video monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed in a compact environment.

Rack mount stereo monitor speaker system with built-in 10W+10W D-class amplifier and 110x40mm elongated shape speaker units.

Accepts both Analog input (XLR & 1/4”TS phone) and Digital Input (AES/EBU).

Headphone out for headphone monitoring.  When switching from headphone out to speaker out or vice versa, the output signal fades in to avoid unexpected level difference.

Mute switch works as total mute or -20dB attenuation

Highly visible 26-dot LED meter (L&R) with 4-step brightness adjustment

Flexible meter setting for both Analog and Digital inputs such as VU+Peak, VU+Peakhold, Peak+Peakhold and VU only.

Reference level (0dB) is selectable between +4dBu and 0dBu.

Audio characteristics can be selected between the conventional VOICE mode and new MU-SIC mode for wider frequency range music source.

Speaker Section
Units    110 x 40 mm antimagnetic cone speakers
Frequency Response:    200 Hz – 20 kHz

Amplifier Section
Rated Output Power    10W x 2
Digital Input:    XLR-3-31 connector (AES/EBU)
        Sampling Frequency:    44.1kHz to 96kHz
Analog Inputs:    XLR-3-31 connector (balanced)
        Rated input level:    +4/0dBu
        Input Impedance:    10k ohm or more
        1/4” Phone jack (unbalanced)
        Rated input level:    -10/-14 dBV
        Input Impedance:    10k ohm or more
Digital THRU    XLR-3-31 connector (AES/EBU)
Analog THRU    XLR-3-31 / 1/4” TS phone
Phones:        1/4” stereo phones
        Adapted load impedance:    16 ohm or more
        Maximum output:    20mW + 20mW (32ohm, 1kHz)
Level Meter    26-dot LED x 2
        Reference Level:        Digital -20dBFS
Analog XLR +4/9dBu; TS phone -10/-14dBV
Distortion (T.H.D.)    0.1% or less

General
Dimensions:    482 (H) x 44 (W) x 284 (D) mm  (including protruding parts)
Weight:    approx. 3.5 kgs
Power Requirement:    AC 100V to 240V 50/60Hz
Power Consumption:    10 W (0.5W  or less in standby mode) - See more at: http://www.fostexinternational.com/docs/products/RM-3.shtml#content-3-tab-tab