Following the successful introduction of the AR101 to iPhone video creators with its flexible compatibility to iPhone 4/4S and iPhone 5/5S, there has been increasing demand for handy and easier solution for powering the AR101 during the use with a DSLR camera. 

Model AR101L comes with a dedicated battery pack that can be attached to the AR101 main chassis, which also make possible the connection with iPhone 5/5S via the Lightning-USB cable supplied with the iPhone package.

Comes with the dedicated battery case (left picture) as standard that can be attached to the AR101 and feeds power to the main unit when being used as an audio interface for a DSLR camera

• The battery case also doubles as a converter from Lightning connector to USB mini B connector making possible the use of iPhone 5/5S without Lightning-30Pin adapter

• Improves the audio quality of iPhone and DSLR camera

• Comes with the dedicated battery case (left picture) as standard that can be attached to the AR101 and feeds power to the main unit when being used as an audio interface for a DSLR camera.

• The battery case also doubles as a converter from Lightning connector to USB mini B connector making possible the use of iPhone 5/5S without Lightning-30Pin adapter.

• Improves the audio quality of iPhone and DSLR camera.

• Both Input 1 and 2 accepts stereo Line / Mic (plug-in power), i.e. maximum 4 channels can be fed.

• Also works as an audio interface for PC by connecting with an off-the-shelf mini USB-USB A type cable.

• 2 x Plug-in power condenser microphones come with the package.  Off-the-shelf plug-in power type microphones can be used too.

• The rotary encoder and the LED level meter for easy setting of various parameters including Input level of each channel, Pan, Headphone Out, etc.

• A dedicated AR101 APP can be downloaded from iTune Store to control Pan, Low Cut, Limitter, Output Level.

• Headphone Monitor Out to monitor the input and playback signal.

• Analog Out (Line-Mic selectable) to output the input or playback signal, or mixed.

• No battery required, being powered from the connected iOS device via USB.

• When feeding power via micro USB, the AR101 also feeds power to the connected iOS device.

• The chassis has a shoe rail on which various Camera rigs can be mounted.

• Comes with a device holder that can be used either in landscape (horizontally) or portrait (vertically).  It has screw holes on the horizontal and vertical sides for the supplied hand grip or off-the-shelf tri-pod etc.

*The inner earphones are not included in the AR101L package
*The battery case feeds power only to the AR101, not to the connected iPhone.
*The battery case cannot be used with iPhone 4/4S.  Use the supplied 30pin-USB cable.

Analog Input
Connector: 3.5mm dia stereo mini x 2
Input signal Line / Mic
Gain: -12 to -59.5dB
Plug-in Power approx. 2.5V (always)
Level Meter LED: 11 dots

Phones
Connector: 3.5mm dia stereo mini
Load Impedance: 16 ohm or more
Maximum Output Level 15mW (32 ohm load, THD less than 0.1%)

General
Frequency Response: 20Hz – 20kHz +/-3dB (Line In – St Out / 15mW / 32 ohm load)
Noise Level: less than -93dBV (Mic – St Out / Input Gain Max)

Dimensions: 83mm (W) x 31mm (H) x 33mm (D)  (w/o mics, holder & grip)
Weight: approx. 60g (w/o mics, holder & grip)
Power Consumption: 200mW

Accessories
Unidirectional plug-in power microphone x 2, exclusive 30pin-USB mini B cable, carrying bag, hand grip, smartphone holder, shoe holder, battery case (new), AAA battery x 2 (new)